[隐藏]

1.实验环境:

 

机型: DL380 G7
HPSUM版本: 6.0.1
系统版本 Win 2008
驱动包版本 HP_Service_Pack_for_Proliant_2013.09.0-0_744345-001_spp_2013.09.0-SPP2013090.2013_0830.30.iso(可以使用PSP)

 

 

2.已知issue

如果在Linux运行HPSUM远程刷新Win服务器会有下图报错,请让HPSUM运行在Win上

下文为官方信息:

Cannot add a Windows node when running HP SUM on a Linux host

Solution: This is a known issue. Run HP SUM on a Windows host to add Windows nodes

 

3.前期准备

3.1.安装SNMP

如果需要安装”System Management Homepage”,需要先安装SNMP协议,如果不需要安装此工具,可以跳过此步:

以下步骤是在需要刷新驱动、固件的服务器上操作

点击下图红框部分:

如下图操作:

选择SNMP服务:

选择安装:

 

安装进度:

提示安装成,选择关闭:

3.2.配置SNMP

同样在”服务器管理器”中,选择配置–服务

找到SNMP Service,鼠标右键,选择属性:

 

选择安全–添加,如下图:

如下图:

选择”确定”:

 

重启SNMP服务:

重启进度:

4.下载SPP

以下步骤可以直接在工作机或者服务器上操作

请下载SPP包,将其解压或者加载到虚拟光驱中,此实验将镜像加载到了光驱D盘

SPP下载地址:

http://www.hp.com/go/spp

http://pan.baidu.com/share/link?uk=4026856431&shareid=4048505097

5.或者下载PSP包

 

6.下载HPSUM

登录以下链接:

http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=us&sp4ts.oid=5182021

如下图,请下载对应服务器系统的版本,如果是Win 7系统,请下载Win 2008版本,如果是Win 8系统,请选择Win 2012:

选择HPSUM的主链接:

 

下载HPSUM压缩包:



7.运行HPSUM

下载到服务器上或工作机上,解压后运行下图红框部分:

此时会弹出黑框,并开启浏览器,建议安装火狐浏览器,虽然下面说支持IE,但是实际中IE会出现问题:

 

也可以直接在浏览器中输入地址:

http://localhost:63001

如果需要远程连接此HPSUM服务,需要将localhost部分改成此服务器的IP,并将服务器防火墙关闭或者开发63001和63002端口

如果单独输入链接进入,会出现如下情况:

 

并要求输入本机的系统管理员密码:

8.添加基准库

登录后如下图点击:

 

如下图:

输入

 

勾上SPP包中的sqpackage目录,并点击OK:

点击 Add:

9.添加节点

如下图红框操作:

 

选择”Nodes”

如下图操作:

输入需要更新Windows驱动、固件、软件的服务器IP,如下图操作:

 

拖至页面下方,输入服务器的管理员账户密码,并按Add:

开始扫描服务器信息:

选择Inventory:

 

选择SPP包,如下操作:

此时页面可能不会自动关闭,选择Cancel:

10.开始部署

开始扫描可安装驱动、固件、软件:

 

再次编辑Win服务器,将鼠标移动至”Edit”位置,即可自动出此按钮:

输入管理员账户密码,选择SNMP(如果需要安装System Management Homepage,建议选择此项)

再次扫描可安装驱动、固件、软件:

 

如下图,设置需要更新的驱动、固件、软件:

一般默认,并选择”Deploy”:

如果需要单独安装某软件或驱动,可以在搜索框中搜索,并按Analysis:

 

之后再按Deploy:

 

此时页面可能不会自动关闭,请选择”Cancel”

开始安装驱动、固件、软件:

10.1.报错信息

此时如果出现报错,可以查看安装日志:

可以看到两个驱动不适合此服务器,这样的报错可以忽略:

如果遇到可以排除的错误,需要在Node界面,如下操作,才可以重新部署:

 

选择包:

 

完全部署成功后,会根据实际情况提示是否需要重启:

选择重启:

 

选择重启后,此页面不会自动更改,直接忽略即可:

11.检验结果

可以看到新装的系统下已经打好所有驱动、软件

 

12.附录

12.1.被部署的Win系统要求:

在CMD中输入 netstat -aon可以查看,需要开启一下端口:

 

 

 

12.2.Network ports used by HP SUM

HP SUM requires that certain network ports are available for proper operation. If you lock down network ports, make sure that the ports listed in the network port tables are open so that HP SUM works correctly when connecting to remote node servers and hosts. If you are unable to unlock these network ports, the only option is to run HP SUM locally and update network-based hosts, such as the OA, Ilo, and VC modules, through their web interfaces.

Updates for most node types require network traffic in both directions between the server running HP SUM and the node. The server running HP SUM creates a local HTTP server, which is used to serve firmware binaries to the node and to communicate node status. The remote node issues HTTP requests and posts status updates to the server running HP SUM during the update process. If there is a routing problem or firewall blocking traffic back from the remote node to the system running HP SUM, firmware updates might be blocked, status updates blocked or delayed, or both.

12.3.HP SUM Windows network ports

Ports Description
Port 22 Establishes a connection to a remote node via SSH to perform node inventory.
Port 443 A secure data port used to transfer information.
Ports 445 and 137/138/139 (Port 137 is used only if you are using NetBIOS naming service.) Connects to the remote ADMIN$ share on node servers. These are the standard ports Windows servers use to connect to the remote file shares. If you can connect remotely to a remote Windows file share on the node server, you have the correct ports open.
Port 62286 Default for some internal communications. This port listens on the remote side if there is no conflict. If a conflict occurs, the next available port is used.
Ports 63001–63002 Updates are passed to the node and retrieved through an internal secure web server that uses the first available port in the range of 63001-63002. This allows Ilo and VC firmware updates without having to access the host server. It also allows the servers to run VMware or other virtualization platforms to update the Ilo firmware without requiring a server reboot or a migration of the virtual machines to other servers.

Remote HP Integrity Ilo and Superdome 2 updates require these ports to be open on systems for network traffic in both directions to transfer firmware files.

Ports 21 or 63006–63010 You can use these FTP ports to perform switch updates.

 

 

12.4.HP SUM Linux network ports

Ports Description
Port 22 Establishes a connection to a remote node via SSH to perform node inventory.
Port 443 A secure data port used to transfer information.
Port 62286 Default for some internal communications. This port listens on the remote side if there is no conflict. If a conflict occurs, the next available port is used.
Ports 63001–63002 Updates are passed to the node and retrieved through an internal secure web server that uses the first available port in the range of 63001-63002. This support allows Ilo and VC firmware updates without having to access the host server. It also allows servers running VMware or other virtualization platforms to update their Ilo without having to reboot their server or to migrate their virtual machines to other servers.

Remote HP Integrity Ilo and Superdome 2 updates require these ports to be open on systems for network traffic in both directions to transfer firmware files.

Ports 21 or 63006–63010 You can use these FTP ports to perform switch updates.

12.5.Special network configuration note for HP Integrity servers

HP Integrity servers have management network and production interfaces. These are usually kept on separate subnets in an installation. To perform full remote administration of the server, access is required for both networks. If you keep both networks isolated, you need to perform management and operating systems tasks separately.

发表评论